Category Archives: Ubiquiti Router

Ubiquiti Unifi | UAP-AC-LITE

·

Finally in stock, is the Ubiquiti Unifi AC-LITE.  These units are working great, and they are backward compatible with your older 802.11B/G/N access points.  If you are looking to expand the wireless network products currently installed in your Unifi setup, this AC-LITE can be implemented on the same Unifi software.  It will be adopted just as easily onto your wireless network.  These AC-LITE access points are in stock, and can be sold individually,or in sets of 3, similar to the UAP-LR-3.  With the UniFi controller software running in an NOC or in the cloud, administrators can extend and centrally manage the wide areas of indoor and outdoor coverage, using any combination of UniFi APs.  FOr coverage both indoors and outdoors, place the Ubiquiti Unifi Access Point on the ceiling or close to a window for extended range outdoors.

Ubiquiti_UAP-AC-LITE_Wireless_Access_Point

Unifi Ubiquiti Access Point

The Unifi Ubiquiti AC access point can be powered via the included POE injector, or via a POE switch.  The 8-port POE-Pro is in stock, and will support the Unifi suite of wireless access points.

Power over Ethernet (PoE)

Power over Ethernet (PoE) functionality allows both power and data to be carried over a single Ethernet cable to the device. The unit can be powered from an included PoE adapter as well as the Ubiquiti TOUGHSwitch PoE PRO (sold separately).

Please contact us if you’d like more information on the Ubiquiti Unifi UAP-AC-Lite solutions or our point-to-point Ethernet radios.  Toll Free:  877-209-5152 or click here for more contact information.

 

Ubiquiti Commercial Grade Wireless Routers

·

Typical home based routers and wireless routers are quite slow when more then 20-30 users are online at the same time.  For an application such as a Campground, Marina or RV Park, where a client has more then 50 users online at any given time, a more commercial grade wireless router, such as the Cisco RV042 or Ubiquiti ERPRO-8 should be installed.  Although this is not a wireless router, this cisco router can be connected to high power wireless access points for long range wireless, or connected to a range extender.   More commercial grade routers can actually set an upload/download speed so that no single user can “hog” all available bandwidth.  Such a router would be the RV042, or ERPRO-8.  Built in POE will allow you to expand your wireless network bridge, or wireless booster without the need for additional wall power plugs.

These higher end routers also have faster processors to handle more users.  To see how many users are accessing your network at any given time, log into the web based configuration of the router, and navigate to the DHCP list page.  This will give you a real time estimate of how many users are on the network.  If you see a certain time of day that the network bogs down, log in to the router again, and see how many users.  Most likely you will see a large number of people using the wireless or wired network, which would be a reason to upgrade the router.  The ERPOE-5 router for example has a built in POE switch, which will allow you to power both indoor and outdoor access points, range extenders, or other wireless network adapters that support 24V passive POE.

The best wireless router to use, in our recommendation is one in which you are familiar with.  Depending on the application, GNS Wireless might recommend a ERlite for one application, and may recommend a cheaper wireless n router for another application.  It really depends on how many users, what type of usage, and what type of features you would like available for your wireless network.  With these types of wireless routers, you will not be able to configure a “router repeater”.  The wireless access point will control the long range wireless functionality, not the router.  Routers alone will control the connection to your cable/dsl modem, control the DHCP table, security features such as VPN and remote access, and bandwidth control.  All other features such as wifi boosters, wireless boosters, and wifi signal boosters will be the responsibility of the wireless access point.  Other quality indoor routers would be the linksys e3000, linksys e4200 and the TP-Link WR1043ND.  These would be some of the best wireless routers to use for small office, or home office use.  Other great routers that work very well for small to medium sized businesses are the Ubiquiti routers, such as the one above, or ERPOE-5, ER8, ERPRO-8 and ERlite-3.  All of these wired and wireless n routers from Ubiquiti have their own particular features that work very well depending on your application.

The Ubiquiti AirRouter can be used as a wireless booster, or wireless extender depending on your application.  The configuration of this router will allow you to change the settings such as channel size, security, or access point vs router mode.  Adding range extenders to this type of setup will increase range, but not exactly increase speed.  When wireless repaters are used the throughput of the connection to the wireless repeater will decrease depending on distance, interference, and wireless mode.  The best wifi signal booster is to use an external access point for extending the range of the wireless network.  Such a wireless booster would be the APC2M, which has up to 1000mW transmit power and your choice of external antenna.  Another option is the APC2M-8, which has an integrated 8dBi directional patch antenna.  This will boost your wifi signal in one direction, up to 60 degrees, and works very well in applications such as warehouses, or externally for campground, RV Parks, or Marinas.  The best wireless router to use with either of those access points is the one you are familiar with, or chose the TPLink WR1043ND.

For more information, please contact us at 516-214-0321.