*NEW* 802.11AC, Complete Point to Point Wireless Bridge kit allows you to connect any 2 locations up to 1/2 mile apart. Unobstructed Line of sight is recommended. New features include faster throughput, high packet per second processing, and additional channel width up to 80MHz for increased 802.11AC speed! This allows greater flexibility in high interference environments. The 19dBi gain integrated antenna will allow for a stronger signal between your two wireless bridge antennas. Connect your 802.11AC wireless routers using this pre-configured wireless bridge pair of radios.
Whats included in this point to point link: 2x Outdoor 802.11AC Radio w/ Integrated 19dBi Patch Antenna
2x Power over Ethernet Injector (24V Gigabit PoE)
2x POE/Power Supply
2x 50ft. Shielded cat5e Ethernet Cable
2x Pole Mount Hardware for 1-1.5″ OD mast
These bridge antennas are pre-configured and paired to each other, for “out of the box” installation and operation. External Signal LED’s will assist with alignment and troubleshooting procedures. Maximum cat5e cable to be used on each end is 250ft. (Shielded cat5e is recommended). 1 year warranty includes technical support.
This complete link ships pre-configured for “out of the box” installation. No configuration is required. Web based management allows for adjustment of TX/RX power, Security type, signal strength/signal noise reading, and real time throughput estimates. POE, PS, and pole mount hardware is included in the kit. Any 1-1.5″ diameter mast/pole, will allow you to mount the antennas. If you require additional mounting hardware, please let us know.
This 802.11AC wireless bridge, or Point to Point Wireless Bridge includes a pair of outdoor wireless bridge radios, that have an integrated 19dBi directional patch antenna. Once the outdoor radios are installed at each location, they operates as a transparent wireless bridge, and will pass all network traffic between your two locations. The Wireless network Bridge operates similar to an invisible Ethernet cable connecting your two locations. Each antenna has a beam width of about 10°, so aligning the antennas is easy. Furthermore, you will have the ability to view real time signal strength, link quality, and noise level, using the web based configuration. Each AP has a static IP address, used strictly for web based configuration, and troubleshooting.
Connection to Network:
To connect the access point to your network at each location, a single Cat5 Ethernet cable is used. A 50ft. cable is included for each location. (If you need more cable, a maximum length of up to 250ft. can be used) The Cat5e Ethernet cable connects directly from the outdoor access point using a weatherproof grommet, to an indoor POE (Power-over-Ethernet) injector. The POE injector plugs into a standard AC outlet for power, and another Cat5 Ethernet cable connects from the POE injector to your network (Router/PC/Switch etc.)
For more information please visit: www.gnswireless.com