Author Archives: admin

10 Gbps Point to Point Wireless Backhaul | FLEX4G-10000 Base ODU

· · Leave a comment

FL4G-10000

For ultra high capacity point to point wireless data transfers between buildings, Bridgewave offers the 80 GHz wireless backhaul with up to 10 Gbps transfer rates.   Optional 1ft. and 2ft. antennas for varying distance.  This is a licensed point to point wireless solution.  10 year 80Ghz license has a additional cost of about $750.  For more information, view the full product detail here:  FL4G-10000

Specs

* 9.7 Gbps data rate per 1+0 radio

* 1+0, 1+1 HSB, 2+0 configuration support

* Adaptive Code Modulation from QPSK through 256QAM

* 500, 1000, and 2000MHz bandwidth support

* Highest bit/Hz spectral efficiency at the longest link distances

* Outstanding RF performance benefiting from highly integrated architecture

* LDPC FEC providing threshold improvement over other FEC technologies

* RF channel tuning in 250 MHz steps

* Automatic Transmit Power Control

* Zero-footprint ODU with low power consumption and Power-over-Ethernet

Carrier-Grade

* Carrier Ethernet services enabled via built-in low-latency switch

* Quality of Service (802.1p) traffic prioritization, VLAN (802.1q), Provider Bridge (Q-in-Q 802.1ad)

* Synchronous Ethernet per G.8261 and G.8262 and G.8264

* PTP per 1588v2 – Transparent and Boundary Clock support

* Ethernet OAM support per 802.3ah, 802.1ag and Y.1731

* SONET/SDH & CPRI interfaces

Cambium PTP 550 Gigabit Wireless Backhaul

·

PTP 550 Wireless Backhauls: Up to 1.4 Gbps Capacity

The PTP 550 Wireless Backhaul Series of radios from Cambium Networks support up to 1.4 Gbps throughput in point-to-point wireless configuration.  The PTP 550 is ideal for setting up a high capacity backhaul for any application including voice, video or data.

  • Metal Housing
  • Antenna Alignment GUI
  • Channel Bonding (Dual 80MHz channels achieves 1.36 Gbps)
  • Dynamic Channel Selection (constantly optimizes operation)
  • Live Spectrum Analyzer
  • AES 128 bit Encryption
  • cnMaestro Support
Part # PRODUCT DESCRIPTION STOCK MSRP
C050055H001A PTP550 5GHz Connectorized End with AC Power Supply, Mounting Bracket and US Line Cord (FCC) In Stock $649.00
C050055H002A PTP550 5GHz Connectorized End with AC Power Supply, Mounting Bracket and US Line Cord (IC) In Stock $649.00
C050055H003A PTP550 5GHz Connectorized End with AC Power Supply, Mounting Bracket and EU Line Cord (EU) $649.00
C050055H004A PTP550 5GHz Connectorized End with AC Power Supply, Mounting Bracket and US Line Cord (RoW) In Stock $649.00
C050055H005A PTP550 5GHz Connectorized End with AC Power Supply, Mounting Bracket and EU Line Cord (RoW) $649.00
C050055H006A PTP550 5GHz Connectorized End with AC Power Supply, Mounting Bracket and No Line Cord (RoW) $649.00
C050055H007A PTP550 5GHz Integrated 23dBi Antenna End with AC Power Supply, Mounting Bracket and US Line Cord (FCC) In Stock $779.00
C050055H008A PTP550 5GHz Integrated 23dBi Antenna End with AC Power Supply, Mounting Bracket and US Line Cord (IC) In Stock $779.00
C050055H009A PTP550 5GHz Integrated 23dBi Antenna End with AC Power Supply, Mounting Bracket and EU Line Cord (EU) $779.00
C050055H010A PTP550 5GHz Integrated 23dBi Antenna End with AC Power Supply, Mounting Bracket and US Line Cord (RoW) In Stock $779.00
C050055H011A PTP550 5GHz Integrated 23dBi Antenna End with AC Power Supply, Mounting Bracket and EU Line Cord (RoW) $779.00
C050055H012A PTP550 5GHz Integrated 23dBi Antenna End with AC Power Supply, Mounting Bracket and No Line Cord (RoW) $779.00
C050055L001A PTP550 SFP Module, Gigabit Ethernet 1000BaseT Interface, per ODU In Stock $139.00
C050055L003A PTP550 SFP Module, Single Mode Optical 1000BaseLX Interface, per ODU In Stock $109.00
EW-E1PT550-WW PTP550 Extended Warranty, 1 additional year (per END) $21.00
EW-E2PT550-WW PTP550 Extended Warranty, 2 additional years (per END) $38.00
EW-E3PT550-WW PTP550 Extended Warranty, 3 additional years (per END) $50.00
EW-E4PT550-WW PTP550 Extended Warranty, 4 additional years (per END) $57.00

Does your Mikrotik router keep going down?

·

For campground and RV Park owners who are managing their own wireless network, a quality router that is reliable and easy to use, but also cost effective is important.  We often get calls regarding networks that are down due to a failed router, and recently many of those calls have been regarding a Mikrotik router that has failed.

If you are not charging for Wi-Fi access, and do not require individual user names and passwords for each device on your network then the quick and easy fix is to use the following TP Link router which offers bandwidth control, and ability to setup a splash page for your wireless network.  We use the ER5120 quite often and rarely have a complaint.

We recommend this router for up to 300 or so devices.  Beyond that, you may want to consider a more commercial grade router, or hotspot gateway for bandwidth control like the Nomadix AG2500.

For more information on these, or any other type of hotspot solution, call GNS Wireless direct at (516) 214-0321.

Upgrading existing Ubiquiti Wi-Fi equipment in a Campground

·

Does your Campground Wi-Fi need upgrading?  With winter around the corner here in the North East, we are in our busy season fixing and repairing old or outdated wireless networks at local campgrounds and RV Parks.  Much of what we see is Ubiquiti Wi-Fi access points like nanostations, or bullets not working any more, or unable to handle the load of more than a few guests.  The nanostation NSM2 and NSM5 are great access points.  We still use them for quick Wi-Fi fixes for large outdoor areas like backyards and swimming pools here on Long Island.  Easy to install, and they throw the signal a few hundred feet.  But for campground wi-fi, we choose to replace the old ubiquiti wi-fi gear with more commercial grade equipment like Cambium or Mimosa which can handle more traffic, more guests per access point, and is much more reliable.

If you are looking to replace or update your campground wireless network, now is the time.  Contact GNS Wireless today for a free site survey, and park evaluation.  We will provide an overview with estimated coverage area, and help you figure out exactly what equipment is right for you.   Call us today at (516) 214-0321

Wi-Fi

Commercial Grade Wireless Network Equipment from GNS Wireless

Oil Refinery Wi-Fi Data Bridge | GNS Wireless LLC.

·

A point to point wireless data bridge has many usage scenarios.  We recently had a customer install the GNS-1155Ac PTP between an oil platform and land based monitoring station.  The request was for a high throughput point to point, with high reliability and low latency between two locations at just over 1 mile.  Line of sight was wide open, clear and unobstructed so the GNS-1155AC was a great solution.  Antennas were mounted at  just over 60ft. high.   The results were fantastic with data throughput over 100Mbps.  Because of the integrated 23dBi antenna used with the bridge, wind resistance is very low, and at just over 7lbs per radio, multiple mounting options were available.

The GNS-1155AC wireless data bridge includes the following:

  • 23dBi Integrated Antennas
  • 48V Gigabit POE Injectors (power over Ethernet)
  • 20/40/80 MHz Channel Width
  • 500Mbps Throughput
  • Full 5GHz Frequency Spectrum

For more information on point to point wireless solutions, or to find out if Wi-Fi will work for your application, contact one of the techs at GNS Wireless today.  You can call us direct at (516) 214-0321.  If you have latitude and longitude coordinates, you can also email those to support @ gnswireless.com for a free path analysis.

 

 

Ligowave DLB5-20AC Wireless Bridge | GNS Wireless

·

DLB520AC

802.11AC Slim Line Wireless Bridge

The Ligowave DLB 5-20AC is an outdoor rated, 5GHz 11ac MIMO radio with integrated 20 dBi directional panel antenna for use in point-to-point and point-to-multipoint wireless IP data applications. It Includes a PoE with power cord and free download of remote management system.

500+ Mbps throughput – a result of powerful hardware platform with 802.11ac technology based radio and a proprietary data transmission protocol (iPoll). Incorporating a QCA 9563 CPU (750 MHz), a QCA 9882 radio and 64 MBytes of RAM and 16 MBytes of ash memory the, LigoDLBac series devices are an ideal solution for capacity demanding applications. State of the art RF design with great output power and sensitivity parameters improve range and capacity over the highest modulation – 256 QAM. The 24V Gigabit Ethernet port (passive PoE) allows utilizing the full capacity of the radio when used in a point-to-point or point-to-multipoint network design. Ligo DLB5-20ac series devices are backwards compatible with LigoDLB devices using iPoll mode, which helps to expand or upgrade existing networks using the latest technologies over time.

What is the default IP Address of the Ligowave DLB 5-20AC?

The Default IP address of the DLB series of access points, and point to point bridge antennas is set to obtain an IP address automatically from your DHCP server (router).  If you are connecting directly to the Ligowave DLB 5-20AC, or DLB 5-15AC, or do not have a DHCP server on your network, then the unit will default to 192.168.2.66.

What is the default username and password for Ligowave DLB5-20AC, or DLB5-15AC?

Username: admin | Password: admin01

 

How to position Wi-Fi Access Points | GNS Wireless LLC.

·

Major Wi-Fi Access Point (AP) manufacturers recommend mounting Wi-Fi Access Points horizontally for optimum performance. For outdoor 802.11AC Wi-Fi Access Points, GNS Wireless carries an array of wall mount hardware for positioning the AP correctly for optimum coverage.  Right Angle Wall Brackets, Universal Antenna Mounts, or non-penetrating roof mounts are a simple solution for installing the Wi-Fi Access Point correctly on a wall or rooftop.

Other Products you may need:

 

Ubiquiti Networks Unifi POE Switches | GNS Wireless

·
Unifi Gigabit Switch

Unifi Gigabit Switch

So far, so good.  The new unifi line of POE switches from Ubiquiti Networks has yet to disappoint.   Pretty much the entire line of Unifi gear, from the access points, cameras and switches have been engineered with a technical point of view.   They are reliable, and if you are well versed on the Unifi software, easy to use.

The Unifi POE Switches come in a 16, 24, and 48 Port flavor.    Each supports 24V and/or 802.3af/at POE.  You can power up any Unifi access point, which mostly use 24V, as well as the cameras, which support 48V.  The 16 port US-16-150W has a switching capacity of  36Gbps.

Build and expand your network with Ubiquiti Networks UniFi POE Switch, part of the UniFi line of products. The UniFi Switch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks.

  • (16/24/48) Gigabit RJ45 Ports
  • (2) SFP Ports
  • (1) Serial Console Port
  • Supports PoE+ IEEE 802.3at/af and 24V Passive PoE
  • Rack-Mountable or Wall-Mountable with Rack-Mount Brackets (Included)

For more information, or to get a quote on your wireless network application, contact GNS Wireless today.  (516) 214-0321

Marina Wi-Fi Solutions | GNS Wireless

·

Contact GNS Wireless for equipment sales and fully managed wireless IEEE 802.11 guest high-speed internet access (HSIA) to marinas, yacht clubs, mooring basins and RV Parks.  GNS Wireless is guaranteed to deliver 99% coverage to your marina or RV park, or your money back.  Its that simple.  Our Marina Wi-Fi solutions can be ready to deploy in less than 24 hours.

Our goal is to deliver reliable, easy to use Marina Wi-Fi to the industry using our proprietary wireless network technology.  We make sure the Wi-Fi signal is strong, reliable, usable, and hassle free.  Contact us today for a Free Survey Analysis.

Marina Wi-Fi

Marina Wi-Fi Solutions

High Bandwidth Backhaul Links | GNS Wireless LLC.

·

With new point to point links being pushed out almost daily, breaking free from fiber connections has never been easier.  With even the most residential grade point to point bandwidth links providing 500Mbps (half duplex) speeds for less than 1/2 mile distance to the fastest Bridgewave wireless back hauls providing over 10Gbps!  Amazing speed is now available for almost any distance (within reason, and provided you have line of sight), and almost any budget.

GNS Wireless is now stocking point to point links from the following top manufacturers:

  • 400Mbps Proxim QB 10150 Link Lite, MIMO 2×2, 22 dBi Panel Antenna | Part# QB-10150L-LNK
  • 450Mbps Cambium PTP670 Integrated Antenna End w/ Enhanced POE | Part# C050067H004A
  • 500Mbps Siklu EH-600TX-KIT EtherHaul-600TX 500Mbps Complete Link  | Part# EH-600TX-KIT
  • 866Mbps Proxim QB 10150 Link, single radio, MIMO 2×2, 22 dBi antenna | Part # QB-10150-LNK-US
  • 1000Mbps Siklu EH-1200FX-KIT-1FT – EtherHaul-1200FX  Point to Point Link | Part #: EH-1200FX-Kit-1
  • 3000Mbps Bridgewave FLEX4G-LITE, Base ODU, 3Gbps Full-duplex PTP Link, 80GHz  | Part# FL4G-LITE

For real time monitoring, measurement and data analytics, such as the Oil and Gas industry, GNS Wireless can integrate video, voice and data traffic alongside SCADA data from sensors, control plants, solar panels, and control cards – all via a single all-IP based wireless network.  High bandwidth backhaul links will provide seamless connectivity for urban or remote areas with minimum downtime and maximum throughput.

For more information, or to setup a free path analysis, please contact GNS Wireless today.